Main benefits
The HaslerRail Cold Movement Detector (CMD) covers all ETCS functional requirements. When it comes to the ETCS on-board system, knowing whether a vehicle has been moved during the power off phase is crucial.
The CMD delivers a SIL4 function to supervise vehicle movement during the power off phase, transmitting the information to the ETCS on-board system, saving time and lowering operating costs. Drivers no longer have to operate in downgraded mode until the next coordination location to synchronize their positions with the wayside ETCS beacon.
Finally, with the CMD it is possible to reliably determine if a vehicle has been moved during the power off phase of the ETCS on-board system.
The solution is suitable for any rail vehicle equipped with an on-board ETCS system, from main-line locomotives and high-speed trains to suburban units and more.
Product Description
- Power supply: wide range, U_ = 110 V nominal
- Operating ambient temperature range: -40°C .. +70°C, EN 50155: class TX
- Protection degree: IP 20
- Operating altitude: up to 3’000 m above see level
- Operating humidity: yearly average 75%, up to 95% for 30 following days
- Redundant input digital signals: wake-up and set device in supervision mode
- Redundant output digital signals: error flag and movement indication
- Speed sensor input signal: rectangular frequency in the range 0Hz to 6 kHz
- ETCS support for Baseline 2 and Baseline 3
- Configuration set at HaslerRail production
- Standards: EN 50155, EN50126, EN50128, EN50129
- Detailed diagnostic indications available
- Pollution degree: PD2 (PD3 on demand)